did the floorpan change

[Paul_]

in 1990 when they redid the dash, did they change the floor pan of the cv/gm's? only asking because i'm going to start work on my console and i've been using the merk as a test fit only because shifty is buried under snow,lol

[trwp72]

Fllor pans

They changed the floor pans in 1994 IF I remember right.... The seats in my '91 are out of a 1993, ajnd they bolted right in... so the pan should be the same... Tom...

[Cogs]

I think they changed in 91. I might be wrong though.

[boXman]

Changed in '90 or '91. I'd say '90...but not sure.

[trwp72]

Floor pans....

The floor pans DID NOT change until after 1993.. They are the same... the seats are the same, the carpet stock numbers are the same... in 1994 they changed.... My seats are out of the newer style car.. a 1993 and they bolted right in... no changes to seat tracks etc... If they changed, they would not have bolted right in..... I do not know if there was a different floor pan pre 1990... Tom....

[Cogs]

We're talking about a '90 tho. I believe you should be fine. I dont think '90 seats will fit in a '91, so that must mean it was changed then.

[marquisman]

1979-1991 should be the same shit...the body of th car should be exactly the same.

[Paul_]

thanks for the info guys!

[marquisman]

no prob!

[boXman]

NO! The bolt holes are different after '89 or '90! Seat tracks from an '89 WILL NOT fit in a '91. If you have a '91 or MAYBE a '90...you can use seats with tracks all the way to '97 unless the '98+ is also the same, then all the way up.

[marquisman]

are you sure about this?

[boXman]

Yes. They changed to a one piece floor pan. There's a few posts from way back on "the other site" about it.

[marquisman]

no shit eh?

[Cogs]

NO! The bolt holes are different after '89 or '90! Seat tracks from an '89 WILL NOT fit in a '91. If you have a '91 or MAYBE a '90...you can use seats with tracks all the way to '97 unless the '98+ is also the same, then all the way up.

That's what I was tryin to say!