If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Please let us know if things are working or not. This is still somewhat a work in progress so don't be too surprised if things magically appear from one visit to the next.
I am interested in putting sway bars (front and back) on my 2004 grand Marq. I was interested to know if anyone has done this or knows of a company that has these sway bars.
the stock Front bar should be adequate for daily driving, however if you want a larger one, the Police front bar is the best option (29.5mm) it can be identified by the purple dot painted on it. You probably dont have a rear bar, unless you have RAS. the 21mm HPP rear bar should bolt right in.
2003 Town Car Signature - 3.27 RAR, Dual exhaust and J-mod - SOLD 9/2011 89 Crown Victoria LX HPP -- SOLD 9/2010 88 Grand Marquis LS - The Original -- Totaled 5/2006
The 29.5mm bar (CVPI, 95-02) will not work on an 03+
The 04+ CVPI 29mm bar can be used, though
Ford p/n: 4W1Z-5482-DA
If you like more of an oversteer condition (vs factory understeer), you can leave the front bar stock and swap in an HPP 21mm on the rear
Ford p/n: YW7Z-5A772-CA
I suggest running this bar on ENS poly bushings and endlinks.
Complete ENS endlink/bushing kit for rear 21mm: 4.5171R
Comment