8.8 rear spherical bushings. used on trailing arms?

[351-lincoln]

i was wondering if the rear end of my 80 Lincoln has the same upper trailing arm bushing holes as a 8.8?
and if so i then want to know if the upper trailing arm bushing is the same OD side as the lower trailing arms. long story short i want to use 8.8 special bushings in my lower trailing arms.

[mrltd]

The OD is the same, the ID is not. The mustang ones are 12mm and the panthers are 14mm. And the upper axle side bushing is unique. The frame side upper, and both lower bushings are the same, on panthers however. You can easily buy monoballs or hiem joints and tie rod tubes and make your own with some fab work.