no power seat

[rellik god]

my power locks cig lighters in doors work. i cleaned ground under seat and no power to seat i took carpet up traced blk/w wire to see if corroded and all good then i checked the junction block and have power there. im lost here any help would be great thanks

[His Royal Ghostliness]

So you have power at the junction block, but not on the other end of the black/white wire that feeds the seat electrics? When you tested the junction block, did you just touch the "buss bar" thru one of the open slots in it, or did you probe the back of the connector that the black/white wire comes out of? When checking for power at the seat itself, where are you grounding your testing device?

[rellik god]

have power at the junction block and the "buss bar" thru one of the open slots in it, and nothing at back of the connector that the black/white wire and grounding at seatbelt bolt