Search:

fluid capacity depends on torque converter size. models with 11.25" torque converter(police/HPP/sport/Marauder) take 13 qts to fill. models with 12" converter take 14 qts to fill. IF you remove...

I am sure marty at MO's speed shop can do a tune for you. the only question I have is about the difference in fuel between the 2 countries and how it will affect the timing curve.

I make and sell Jmod kits. I can ship you a kit or I can give you information how do it yourself.
check out my Face book page
...

what Gadget said...

56 is MAF circuit above maximum voltage.

98 is FMEM (failure mode effects managment) which means the ECM is ignoring the signal from the MAF and running on a previous,...

yeah, the A9P is not going to recognize the transfer function of the 94-95 MAF. change the MAF or find somebody to tune the ECM.

when do you get these codes? key engine off test, Key on engine running test, continuous memory test?

basically the codes are saying both O2 sensors are reading lean, start by checking for...

interior looks pretty moldy...

did you get the entire rear diff assembly or just the axles?

we can start our own festival for southern people, Scott B :)

step 1) you need to have 98-2002 big brakes already on your car.

step 2) you will need the conversion adapter from marty
you will need loaded front brake calipers from a C5 corvette. when I...

nothing Marty does is "unwittingly"... he just hasnt had time to develop the kit.

Just remember, you need 18" or larger wheels to clear the brakes.

I have been able to confirm with Marty at MO's speed shop, he has had brackets made to bolt the corvette calipers to the 98-2002 crown vic/grandmarquis spindles. So far the brackets have been...

suspension and brakes are the same.

I was under the impression it worked, but havent eyeballed anything in person.

when you say the calipers dont mount... how do you mean?

size of rear bar is dictated by spring rate. LX cars with softer spring rate got a 17mm rear bar. Police cars with higher spring rate got a 18mm rear bar. HPP and cars with RAS got a 21mm rear...

several guys on MM.net figured out how to run 14" Mustang rotors on the newer panther chassis spindles.

Basically, you need to have the 98-2002 big brakes already on your car.
all you do is...

everything is stock 93 OBD-I, except for the IAC. custom made EGR tube and marauder air box and 2004 zip tube

2001 PI installation was a complete success... had the guys at MO's speed shop do a custom tune and the car dyno'd at 240HP.

49983

Its not too bad, but the transmission does have to come out.

remove the valve body
remove the OD band servo
remove the front pump
remove intermediate clutches
replace the OD band
install...

thats my point, it sounds like the shop may have fixed a harness problem, which was causing the engine to die/sputter, but then timed the engine incorrectly. which is why I am saying to pull the...

also... here is the link for the all the trouble codes and what they mean.

http://www.grandmarq.net/vb/showthread.php?31462-EEC-IV-2-digit-trouble-codes

hold up a minute.... Make sure you are are following the proper timing procedure, because it doesn't sound like you are using the correct marks.

1) there are degreed marks on the balancer,...

The plan, for now, is to keep the stock ECM - EEC-IV system and coil packs. no interest in coil on plug for this application.

This car already has Mustang 4.6L shorty headers and a custom...

My friends daughter grenaded the stock engine on his 93 crown vic. we have decided to install PI engine from a 2001 Grandmarquis. I know the swap has been done on Sly's 93 car. looking for input...