Looking to buy a firewall grommet for my 85 vic, and hardware. thanks [ATTACH=CONFIG]55564[/ATTACH
![]() ![]() |
GMN Chat Room | GMN's STORE!! | GMN's Gallery | Please!! |
Type: Posts; User: 1985crownvicltd85; Keyword(s):
Looking to buy a firewall grommet for my 85 vic, and hardware. thanks [ATTACH=CONFIG]55564[/ATTACH
Pm them to me, thanks
What year is the crown vic, and how much are they looking to get for it? also how much for the 1990 grand marquis?
My car still has its original 2 core Rad, will I have to modify anything to get the Cu552 Rad to fit? Or am I better off getting the Cu547, thanks for the help.
Does anyone know the correct spectra premium Radiator I would have to buy for my 85 vic, thanks for the help.
It was stuck, I had to use some heat and penetrating fluid, now everything moves freely, the second headache was getting the rivets out.
The car is currently awaiting a steering box from a 98-02 Panther, so I figured I better get the steering shaft ready. 544095441054408
54411
I did try that too, but it didn't make much of a difference, It was closer but I couldn't get it where I wanted to. I ended up removing the cardone box, and am currently looking to buy a 98-02...
Can i use the three steering box bolts or do I have to get them off of a 98-02?
I tried with the steering wheel lock tool and with my coworker sitting in my car holding the steering wheel, im sure if I try it again I can get it better, but I dont see it being perfect. Also do...
Last week I replaced my steering box with a Cardone 276555, I also replaced the pitman arm, both inner tie rods, outers and sleeves, I then set the alignment using the string method, once completed I...
Looking to buy tail lights, the lens fell off while driving.
(1985 Crown vic)
thanks!
looking to buy window vent shades for my tudor.
I replaced the entire cable, I think I'll try using a handful of white lithium grease to see if that fixes it.
So last year I replaced my speedo cable because it was bouncing, I also replaced the speedo gear, and sensor assembly, as well as using dorman graphite speedo lube. After replacing, it still...
So the vacuum line that goes from the can shaped vacuum canister to the firewall has a hole in it I was wondering if I should buy a vacuum line from the store or order it online, since its one of...
I believe they're pressed on, maybe try using a small cutoff wheel to remove it (be careful) and once all the pieces are completely removed install the new one with a rubber mallet.
So i plan on replacing my dew wipes soon on my car (no vent windows) and i just wanted to make sure everything i have listed to use is correct: ...
When upgrading to 3g, have any of you added a resistor just in case the warning lamp burns out?
Amazon: https://www.amazon.ca/gp/aw/d/B007XUIF52/ref=ox_sc_act_image_2?smid=A3DWYIK6Y9EEQB&psc=1
and
:https://www.amazon.ca/gp/aw/d/B000CAYT2S/ref=ox_sc_act_image_1?smid=A3DWYIK6Y9EEQB&psc=1
Im thinking of buying this: https://www.painlessperformance.com/wc/30831
and then buying an alternator on rock auto.
Is there anything else im missing besides the belt, bolt and nut for the...
I think im going to gather everything I need from the wreckers, and parts store, it seems to be the cheapest option for the 3g swap.
thanks, appreciate the help!
Would I be able to use this kit? https://lmr.com/item/SVE-17046K4/Mustang-SVE-Alternator-130-Amp-79-85