Search:

Just watched the whole thing... the guy really knows his stuff! He's just casually throwing things in a pile, but he must know exactly where each piece goes! Cool to watch, thanks for posting!

There's no adjustment in there for speeds? I figured at least with the police clusters there would be a little "slower/faster" lever to adjust it, like in a clock.

I put a baumann shift kit in my trans. Definitely start with level 2, i did level 2 with 1-2 shift and level 1 with the others. Level 2 WILL break the tires loose with its shifts at 3/4-WOT. It's...

Looks clean! Nice work. I had the same suspension on my maverick and never had to put anything there- maybe I should have, but never had any problems

The problem with having the base timing so high, is that the entire spark table is shifted higher. You could be running a crazy amount of timing at WOT, which could cause problems you might not even...

Awesome! Sometimes it take a lot of work to find an easy fix

Thank you guys! I'm ready for a ride too haha. BTW Tiggie I like that quote "To become a car with go power, a car must first humble itself and become a car with no power."

Headers ported nicely- no holes that I could see. Painted them with VHT high temp stuff...we will see if it even lasts a year.

Got the WR-AOD from Zach (big thanks to him for meeting me halfway!)...

When my NSS went bad, i was able to start it in neutral but not park. worth a shot

Awesome!

Well so far so good.. my EVTM is from 1982, so someone with a newer one will have to chime in. Until then I’d check for spark, maybe the ignition module got fried. Take a plug out and ground it, or...

Hey it happens- the first thing I’d try is to bypass the key to see if you can make it turn over- hook the battery up and use a screwdriver (or anything metal) to contact the signal prong (the little...

Well I won't be towing, but might autocross once or twice- the converter is still lockup thankfully. They do sell multiple sizes in different steps, I just wasnt sure if the stock one would still be...

Bigger transmission cooler:...

Did you push her in the corners? How’d it do?

VicCrownVic I appreciate it, I hope you find one!



Let me check it out, I have a buddy near there, thanks for the lead!

Bump for bumper, lost a bolt on mine due to rot, hoping the bumper will hold on

PM sent and bought. Thank you! And thank you Wagonman for looking!

Hi- that appears to be the intermediate shaft, I'm looking for one that looks like the one in the picture below. Thanks!

55984

LTB 95-02 Lower Steering Shaft, going to replace my steering gear with a new style so need it to convert. Thanks!

PM sent!

Bump! Anyone have a used metal one for sale? there's a NOS one on ebay for $40...but if someone has a used one cheaper i'd prefer it

5596555966

Always hated these BBK headers... expensive coating failed after a year, had some leaks, broken weld. Well they are still screwing me over. The gasket is about the size of the ports on...

Damn, that things bad ass! What do you rev it to typically?

It was a lot better than pulling it in 20 degree temps, which it seems i work in far to often! XD.

Don't worry Mark it's all yours!

Yes i found it was necessary the first time in 2018 when we...