Announcement

Collapse
No announcement yet.

Carb Gasket

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Carb Gasket

    I finally got a new carb, and removed the old one, the old carb has a thicker gasket, (its in between the egr spacer and carb) Now my rebuilt carb came with a paper thin gasket, I was wondering where this goes, as the gasket currently on the car is a lot thicker than the gasket that came with the rebuilt carb, any help would be appreciated thanks.

    #2
    can you post some pictures of what your talking about?
    2007 Ford Crown Victoria LX Sport

    Comment


      #3
      you use one or the other. The thick gaskets are useful to help with vapor lock issues. Basically it keeps heat from the intake from transferring to the carb body where it could be hot enough to boil the fuel in the bowl. I expect in stock form it used the thin gasket and someone put a thick gasket on.

      By "thick" and "thin", usually the thin ones are about 1/16" thick and the thick ones are more like 5/16"
      86 Lincoln Town Car (Galactica).
      5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley

      91 Lincoln Mark VII LSC grandpa spec white and cranberry

      1984 Lincoln Continental TurboDiesel - rolls coal

      Originally posted by phayzer5
      I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers

      Comment


        #4
        I would go with the thicker one. When I rebuilt my carb I used the thinner mounting gasket that was supplied with the rebuild kit and the gas in the carb would boil. I can't remember if I ordered a new thicker one or reused the original. It's weird but that little bit of space seems to make a huge difference!
        ************************************************** ******************************
        1997 Crown Vic - Mostly rust free, moderate mileage. On the road... but far from perfect. **SOLD**
        1985 Crown Vic in 2-Tone Blue **SOLD**
        http://automophiliac.blogspot.ca/

        Comment


          #5
          http://www.grandmarq.net/vb/showthre...2bbl-302/page5

          There's the link to the thread where I discuss this and show the comparison. You can browse back a few pages to get some more details on the rebuild and all the fun issues I ran ran into.
          ************************************************** ******************************
          1997 Crown Vic - Mostly rust free, moderate mileage. On the road... but far from perfect. **SOLD**
          1985 Crown Vic in 2-Tone Blue **SOLD**
          http://automophiliac.blogspot.ca/

          Comment


            #6
            thanks for the help everyone, the rebuilt carb is installed with the original gasket and the car runs great.

            Comment

            Working...
            X