Announcement

Collapse
No announcement yet.

Brake hard lines.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    On the F150, it apparently came out because the new one is installed with a hex head bolt in the original hole.
    On the CV, which I did on my own time, I used an inductive heater after grinding the top of the torx bolt off and removing the line.
    They're not cheap, but if you can buy/borrow/build an inductive heater, they are incredibly handy tools for old, corroded cars (and ships where we often can't have open flame tools).

    Comment

    Working...
    X