Hi Everyone,
A few months ago, I changed directions on my 84 Colony Park project so I am selling all the parts from that build. This package in particular I have to think is a once in a lifetime collection of parts making up a "kit" of sorts to bolt on a turbo and make good power out of a stock or stockish motor. I had this in my wagon and made 360 rwhp at 10lbs of boost on the dyno and ran very low 13's at about 107/108 in the quarter mile. HO cam, explorer intake etc...
See the photo attached - comes with everything shown except the heat exchanger and fans - I re purposed that for another project but it's sold new on ebay for $169. Only other items you will need are an upgraded fuel pump (255 Walbro is cheap at less than $100), a wastegate of your choice and a fitting for the oil return in the oil pan.(also an inexpensive fitting on ebay) and possibly some other small odds and ends I'm forgetting.
Package includes:
rebuilt turbo (I believe it is a 60 mm) with oil feed and drain lines and turbo blanket
driver side turbo manifold from a Cartech mustang turbo kit from the 80's. super heavy and strong.
crossover pipe with MAC header for passenger side and mounting flange for waste gate (you will need to buy your own waste gate - Inexpensive 38mm knock offs are cheap)
C&L 76mm MAF with sample tube for 36 lb injectors
set of eight 36 lb 4 hole injectors
Anderson Ford Motorsport PMS controller and AP9 Mustang ECU (allows easy adjustment of timing, fuel etc....)
MSD 6 ignition box
Summit Racing high voltage ingniton coil
Distributor and correct length wires
Special short Accel spark plugs which are needed on one cylinder for fitment
3" down pipe from turbo with heat wrap
All necessary intake tubing, air filter and blow off valve
Custom intercooler with pump
$1000 shipped.
I have so much more money invested than this but I know there is a very limited market for this kind of package so feel free to shoot an offer. I'd rather it get used as intended than part it out.
I also have a bunch of other parts for sale from this car including full 3" exhaust, 4r70w with 9.5" billet converter, US Shift trans controller, 1.7 rockers, 65mm Lightning throttle body and egr spacer, plus some parts I added after the dyno: edelbrock performer aluminum heads, and TMOSS ported explorer intakes.
A few months ago, I changed directions on my 84 Colony Park project so I am selling all the parts from that build. This package in particular I have to think is a once in a lifetime collection of parts making up a "kit" of sorts to bolt on a turbo and make good power out of a stock or stockish motor. I had this in my wagon and made 360 rwhp at 10lbs of boost on the dyno and ran very low 13's at about 107/108 in the quarter mile. HO cam, explorer intake etc...
See the photo attached - comes with everything shown except the heat exchanger and fans - I re purposed that for another project but it's sold new on ebay for $169. Only other items you will need are an upgraded fuel pump (255 Walbro is cheap at less than $100), a wastegate of your choice and a fitting for the oil return in the oil pan.(also an inexpensive fitting on ebay) and possibly some other small odds and ends I'm forgetting.
Package includes:
rebuilt turbo (I believe it is a 60 mm) with oil feed and drain lines and turbo blanket
driver side turbo manifold from a Cartech mustang turbo kit from the 80's. super heavy and strong.
crossover pipe with MAC header for passenger side and mounting flange for waste gate (you will need to buy your own waste gate - Inexpensive 38mm knock offs are cheap)
C&L 76mm MAF with sample tube for 36 lb injectors
set of eight 36 lb 4 hole injectors
Anderson Ford Motorsport PMS controller and AP9 Mustang ECU (allows easy adjustment of timing, fuel etc....)
MSD 6 ignition box
Summit Racing high voltage ingniton coil
Distributor and correct length wires
Special short Accel spark plugs which are needed on one cylinder for fitment
3" down pipe from turbo with heat wrap
All necessary intake tubing, air filter and blow off valve
Custom intercooler with pump
$1000 shipped.
I have so much more money invested than this but I know there is a very limited market for this kind of package so feel free to shoot an offer. I'd rather it get used as intended than part it out.
I also have a bunch of other parts for sale from this car including full 3" exhaust, 4r70w with 9.5" billet converter, US Shift trans controller, 1.7 rockers, 65mm Lightning throttle body and egr spacer, plus some parts I added after the dyno: edelbrock performer aluminum heads, and TMOSS ported explorer intakes.
Comment