Announcement

Collapse
No announcement yet.

Crimping Tool

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Crimping Tool

    So I just tried out the Wirefy crimping tool I bought a month ago. Up until this point; I was crimping with a set of channel locks. Then I had a crimp come apart and realized I needed to upgrade. Should have gotten this tool long ago. It has me thinking of building my own harness connectors to make wiring easier and a bit more functional. Just thought I'd share my experience/blunder.

    Click image for larger version

Name:	IMG_0613.jpg
Views:	1
Size:	56.2 KB
ID:	1305650

    #2
    channel locks are not crimp tools. Proper ones actually make connections that don't fall apart, shit ones make you hate crimp connectors. Shitty crimp connectors also don't work well no matter what kind of tool you use.
    86 Lincoln Town Car (Galactica).
    5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley

    91 Lincoln Mark VII LSC grandpa spec white and cranberry

    1984 Lincoln Continental TurboDiesel - rolls coal

    Originally posted by phayzer5
    I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers

    Comment


      #3
      I never saw one with a square crimp like that.
      03 Marauder DPB, HS, 6disk, Organizer Mods> LED's in & Out, M&Z rear control arms, Oil deflector, U-Haul Trans Pan, Blue Fuzzy Dice
      02 SL500 Silver Arrow
      08 TC Signature Limited, HID's Mods>235/55-17 Z rated BFG G-Force Comp-2 A/S Plus, Addco 1" rear Sway, Posi Carrier, Compustar Remote Start, floor liners, trunk organizer, Two part Sun Visors, B&M Trans drain Plug, Winter=05 Mustang GT rims, Nokian Hakkapeliitta R-2 235/55-17
      12 Escape Limited V6 AWD, 225/65R17 Vredestein Quatrac Pro, Winter 235/70-16 Conti Viking Contact7 Mods>Beamtech LED headlight bulbs, Husky floor liners

      Comment


        #4
        Yah, that is one of the dies that came with the tool. Even when I was younger and had stronger hands; I couldn’t make a crimp like that. I’ve been pulling on this test crimp for a few hours; even had my Dad pull on it (still has stronger hands); it’s very tight. In the not-so-distant future; I will get a Deutsch connector kit and start practicing making those.

        Comment


          #5
          Originally posted by packman View Post
          So I just tried out the Wirefy crimping tool I bought a month ago. Up until this point; I was crimping with a set of channel locks. Then I had a crimp come apart and realized I needed to upgrade. Should have gotten this tool long ago. It has me thinking of building my own harness connectors to make wiring easier and a bit more functional. Just thought I'd share my experience/blunder.

          [ATTACH=CONFIG]55756[/ATTACH]
          Where's the tool.... man! lol
          1987 CV LX 5.0

          Comment


            #6
            I strip the wire end 2x as needed, fold wire upon itself usually once, remove plastic color with a twist, insert wire, lightly crimp to not break or cut strands, solder with Kester rosin core using Weller Jr. gun, then usually add a wrap of Super 33 tape, then add shrink tube segment, heat as needed, done.
            No ... I'm not arguing with you ... I'm just explaining why I'm right ...

            Now go ... and whatever you do ... have a safe trip!

            Comment


              #7
              I'd actually like to find terminals like the OE ones that crimp into an M shape. I've done that with the special terminals but they must exist for common 1/4" spade connectors and splices and the like. No insulation on those, have to use heat shrink, but they are a much smaller end result and seem to be pretty mechanically robust.
              86 Lincoln Town Car (Galactica).
              5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley

              91 Lincoln Mark VII LSC grandpa spec white and cranberry

              1984 Lincoln Continental TurboDiesel - rolls coal

              Originally posted by phayzer5
              I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers

              Comment


                #8
                Originally posted by gadget73 View Post
                I'd actually like to find terminals like the OE ones that crimp into an M shape. I've done that with the special terminals but they must exist for common 1/4" spade connectors and splices and the like. No insulation on those, have to use heat shrink, but they are a much smaller end result and seem to be pretty mechanically robust.
                I used to buy OEM style terminals from rjminjection tech.com but I think they are no longer in business. You can find stuff on eBay.
                I think I still have a bunch lying around somewhere.
                There is a special crimper for those that has the M shape. It will also crimp the factory weather seals.

                https://img2.tongtool.com/u/64679d9a...9ad6f5pvmK.jpg

                For regular style crimps I use the blue point crimper, works great zero problems

                https://i.pinimg.com/736x/39/c9/f0/3...a2b838e98b.jpg

                Click image for larger version

Name:	39c9f064886d5ea4bc9b94a2b838e98b.jpg
Views:	1
Size:	37.3 KB
ID:	1288625
                Attached Files
                ..

                Comment


                  #9
                  Originally posted by mcb82gt View Post
                  Where's the tool.... man! lol
                  This one...... https://wirefyshop.com/

                  Comment


                    #10
                    I have been using good crimpers similar to the blue point units for years and they get them properly tight but not always pretty.
                    03 Marauder DPB, HS, 6disk, Organizer Mods> LED's in & Out, M&Z rear control arms, Oil deflector, U-Haul Trans Pan, Blue Fuzzy Dice
                    02 SL500 Silver Arrow
                    08 TC Signature Limited, HID's Mods>235/55-17 Z rated BFG G-Force Comp-2 A/S Plus, Addco 1" rear Sway, Posi Carrier, Compustar Remote Start, floor liners, trunk organizer, Two part Sun Visors, B&M Trans drain Plug, Winter=05 Mustang GT rims, Nokian Hakkapeliitta R-2 235/55-17
                    12 Escape Limited V6 AWD, 225/65R17 Vredestein Quatrac Pro, Winter 235/70-16 Conti Viking Contact7 Mods>Beamtech LED headlight bulbs, Husky floor liners

                    Comment


                      #11
                      clipsandfasteners has the OE terminals. I have the crimp tool for them. I know they make "common" crimp terminals that use that OEM style crimp method though. The BMW sensors in the Continental have them. All common 1/4" spade but the crimp to the harness is the M crimp.

                      My regular crimp tool is like that Blue Point but they came from Harbor Freight. Still work well, way better than the crappy crimpers built into most wire strippers.
                      86 Lincoln Town Car (Galactica).
                      5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley

                      91 Lincoln Mark VII LSC grandpa spec white and cranberry

                      1984 Lincoln Continental TurboDiesel - rolls coal

                      Originally posted by phayzer5
                      I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers

                      Comment


                        #12
                        my good crimpers are mia. might have to look into this set.

                        1986 lincoln towncar signature series. 5.0 HO with thumper performance ported e7 heads, 1.7 roller rockers, warm air intake, 65mm throttle body, 1/2" intake spacer, ported intakes, 3.73 rear with trac lock, 98-02 front brake conversion, 92-97 rear disc conversion, 1" rear swaybar, 1 3/16" front swaybar, 16" wheels and tires, loud ass stereo system, badass cb, best time to date 15.94 at 87 mph. lots of mods in the works 221.8 rwhp 278 rwt
                        2006 Lincoln Town Car Signature. Stock for now
                        1989 Ford F-250 4x4 much much more to come, sefi converted so far.
                        1986 Toyota pickup with LSC wheels and 225/60/16 tires.
                        2008 Hyundai Elantra future Revcon toad
                        1987 TriBurner and 1986 Alaska stokers keeping me warm. (and some pesky oil heat)

                        please be patient, rebuilding an empire!

                        Comment


                          #13
                          Originally posted by gadget73 View Post
                          clipsandfasteners has the OE terminals. I have the crimp tool for them. I know they make "common" crimp terminals that use that OEM style crimp method though. The BMW sensors in the Continental have them. All common 1/4" spade but the crimp to the harness is the M crimp.

                          My regular crimp tool is like that Blue Point but they came from Harbor Freight. Still work well, way better than the crappy crimpers built into most wire strippers.
                          Definitely. I can’t stand those style wire strippers/crimpers.
                          For wire strippers I have these 2:

                          https://i.ytimg.com/vi/tmD40LWg3H4/hqdefault.jpg

                          https://cdn7.bigcommerce.com/s-9t4wk...=2&imbypass=on
                          Attached Files
                          ..

                          Comment


                            #14
                            When purchasing wire crimpers; make sure you can get the dies that you will need for things like basic crimps and open barrel terminals. I didn't know that I needed the open barrel die until I had to repair my relay plug. It looks like that die can also be used for making spark plug wires as well.

                            Comment

                            Working...
                            X