PotM GrandMarq.NET - Panther Headquarters Forum Index PotM
GMN Chat Room GMN's STORE!! GMN's Gallery Please!!
Page 16 of 16 FirstFirst ... 6141516
Results 301 to 306 of 306

Thread: My 1983 Continental Mark VI!

  1. #301
    Still Wrenchin'! friskyfrankie's Avatar
    Join Date
    Dec 2021
    Posts
    118

    Default

    Quote Originally Posted by VicCrownVic View Post
    Some come out with no problem others don't. I've broken a few impact T50 bits within the past couple years on 2 cars using a 1/2 breaker bar and dad's old pneumatic impact. (Sunex bits, time to find another brand, open to suggestions, but these were cheap on Ebay, LOL). This was after applying Liquid Wrench top and bottom months in advance and then again the day before and day of the next attempt. I even hammered on that bolt like Derek mentioned.
    Next step when it gets warm again (and after I buy a few more impact T50s) is to get the fire wrench out. All to replace the C-pillar interior panel in the Scab. (3-point belt goes through the panel and has to be unbolted from the floor). I even broke a bit on the same bolt on the JY donor car. For some reason the P-side came out of both cars with no issue, but D-side on the JY '90 and my '91 didn't and aren't budging.
    Wow! Sounds like you did all the proper steps so as Dave said, the first time is the most difficult. Good idea about putting anti seize on the threads before re installing them!

  2. #302
    What a Luxury car should be. mercurygm88's Avatar
    Join Date
    Jul 2011
    Location
    The Firelands
    Posts
    1,613

    Default

    Thanks for all the tips guys. I found someone with Snap-On impacts from 1/2Ē to 1Ē and impact torx sockets. I donít know when Iíll get the chance to mess with it but that should get them out.

  3. #303
    fomoco panthers !
    Join Date
    May 2011
    Location
    Bangor,Maine
    Posts
    4,210

    Default

    I have one frozen bolt in one of the Lincolns. I ended out stripping the bolt even with the proper tools. Don't know what I will do except leave it alone. All the others through the years have come out pretty easy. I do have extra bolts if you need one.

  4. #304
    Wagon Addicted Tiggie's Avatar
    Join Date
    Mar 2006
    Location
    Bedford, VA
    Posts
    6,560

    Default

    The Napa tool line did well for me on the torx bits. https://www.napaonline.com/en/p/CHTS...pressionRank=5
    1990 Country Squire - weekend cruiser, next project
    1988 Crown Vic LTD Wagon - waiting in the wings

    GMN Box Panther History
    Box Panther Horsepower and Torque Ratings
    Box Panther Production Numbers

  5. #305
    2 decades of DDing Box Panthers, now in a Whale VicCrownVic's Avatar
    Join Date
    Nov 2012
    Location
    Shelby Township, MI
    Posts
    3,661

    Default

    Quote Originally Posted by mercurygm88 View Post
    Thanks for all the tips guys. I found someone with Snap-On impacts from 1/2” to 1” and impact torx sockets. I don’t know when I’ll get the chance to mess with it but that should get them out.
    Hopefully, since the car seems to have been cared for, you won't have much issue. Even the easy ones take a good amount of force though.
    I also put anti-sieze on the bolts I re-install like others mentioned because I know how bad they can get. Doing this should help the job to not suck as bad if there is a next time.
    Vic

    ~ 1998 Mercury Grand Marquis LS - new DD
    ~ 1991 Mercury Grand Marquis LS "The Scab" - plenty of rot, backup/summer cruiser
    ~ 1997 GMC Yukon SLT - wannabe winter DD - many issues, returning sometime in the 2020s
    ~ 1991 Mercury Grand Marquis GS "The Ice Car" - Rotting Retired Winter DD
    ~ 1989 Mercury Grand Marquis GS - Rotting Retired DD
    Gone but not forgotten:
    ~ 1988 Country Squire ~ 1987 Ford Crown Vic

  6. #306
    GMN Regular DerekTheGreat's Avatar
    Join Date
    Sep 2014
    Location
    Warren, MI
    Posts
    6,643

    Default

    Yah, as Vic said, the ole blue wrench is a good alternative. Good bye paint though.
    1985 LTD Crown Victoria - SOLD
    1988 Town Car Signature - Current Party Barge

Page 16 of 16 FirstFirst ... 6141516

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
GMN Approved Links!


www.rockauto.com www.adtr.net