PotM GrandMarq.NET - Panther Headquarters Forum Index PotM
GMN Chat Room GMN's STORE!! GMN's Gallery Please!!
Results 1 to 4 of 4

Thread: Quarter window

  1. #1
    Member 91merc's Avatar
    Join Date
    Jun 2022
    Location
    Oklahoma
    Posts
    72

    Default Quarter window

    Anybody know how to replace the little quarter window on the rear door of an 85 MGM? mine was busted and duct taped by PO

  2. #2
    Wagon Addicted Tiggie's Avatar
    Join Date
    Mar 2006
    Location
    Bedford, VA
    Posts
    6,793

    Default

    The door glass and separator bar needs to come out, or drop down in the door. The 1/4 glass then comes out pretty easily with the weatherstrip intact just by pulling on it.

    When I did mine, I drilled the rivets on the main window channel guide to get it to separate from the glass so it could be removed When reinstalling, I replaced the rivets with nuts and tightened them too tight, resulting in a broken window. I understand it's possible to get the window channel guide/window loose from the window channel without drilling.

  3. #3
    Member 91merc's Avatar
    Join Date
    Jun 2022
    Location
    Oklahoma
    Posts
    72

    Default

    So the glass needs removed from the door, not just a roll the window all the way down thing to take the separator out?

  4. #4
    Wagon Addicted Tiggie's Avatar
    Join Date
    Mar 2006
    Location
    Bedford, VA
    Posts
    6,793

    Default

    You could just drop the window into the door but it needs to off the guides and channels so you can move it around.

    The window channel up/down (the metal thing that separates the two windows and the bigger one slides down into) holds the quarter window in. If you can get that loose, you might be able to wiggle the quarter window out of there.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
GMN Approved Links!


www.rockauto.com www.adtr.net