Announcement

Collapse
No announcement yet.

Looking to get new parts for rear suspension like control arms and such

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Looking to get new parts for rear suspension like control arms and such

    Well I was looking up in one of my books and saw that we have the same suspension from 68-88 crown victorias and country squires so I went looking for some after market suspension stuff So what I found so far are these http://store.summitracing.com/partde...5&autoview=sku
    so what do you think will this work
    than I got to thinking didnt ford use alot of 8.8 rears in different cars and I assuming that they have a similar or same suspension set up so than I found these
    http://store.summitracing.com/partde...5&autoview=sku
    so now wad do you think am I right or no
    This is a crown vic rear (89 little off still look the same)
    mustang on a so wats your thought I notice that it does not have the coil holders but still I m looking at the arm links
    Last edited by 83countrysquire; 01-25-2007, 09:05 AM.
    sigpic
    1986 Crown Victoria 302 Cold Air,Mac Shorty headers, Full Dual Exhaust with Super Forty Flows, Wagon Suspension with a Full Sound System Replacement 1/4 time 17.486 @ 77.43mph

    #2
    wont work......they are not the same 68-88........79-91 is more like it........the 68 country squire had rear leaf springs btw

    1986 lincoln towncar signature series. 5.0 HO with thumper performance ported e7 heads, 1.7 roller rockers, warm air intake, 65mm throttle body, 1/2" intake spacer, ported intakes, 3.73 rear with trac lock, 98-02 front brake conversion, 92-97 rear disc conversion, 1" rear swaybar, 1 3/16" front swaybar, 16" wheels and tires, loud ass stereo system, badass cb, best time to date 15.94 at 87 mph. lots of mods in the works 221.8 rwhp 278 rwt
    2006 Lincoln Town Car Signature. Stock for now
    1989 Ford F-250 4x4 much much more to come, sefi converted so far.
    1986 Toyota pickup with LSC wheels and 225/60/16 tires.
    2008 Hyundai Elantra future Revcon toad
    1987 TriBurner and 1986 Alaska stokers keeping me warm. (and some pesky oil heat)

    please be patient, rebuilding an empire!

    Comment


      #3
      well my book was wrong than thanks for the heades up
      sigpic
      1986 Crown Victoria 302 Cold Air,Mac Shorty headers, Full Dual Exhaust with Super Forty Flows, Wagon Suspension with a Full Sound System Replacement 1/4 time 17.486 @ 77.43mph

      Comment


        #4
        Mustang rear end is narrower. there are no coil spring holders because the springs sit on top of the rear lower control arms.

        79-81 CV/GM used a 8.5" differential, 82 and up has the 8.8"

        78 and earlier full size cars got the 9" diff.
        2003 Town Car Signature - 3.27 RAR, Dual exhaust and J-mod - SOLD 9/2011
        89 Crown Victoria LX HPP -- SOLD 9/2010
        88 Grand Marquis LS - The Original -- Totaled 5/2006


        I rebuild AOD/AODE/4R70W/4R75E transmissions....Check out my Facebook page: https://www.facebook.com/pages/North...48414635312478

        Comment

        Working...
        X