More on this 3-headed wire (coil positive/TFI pin 4/IGN relay) :
![Click image for larger version
Name: IMG_20190812_143949.jpg
Views: 2
Size: 88.4 KB
ID: 1285725](filedata/fetch?id=1285725&d=1565616239)
In short; I get 10.4(k?) ohms (200k setting) from TFI pin 4 to IGN relay wire (in pic above),
I also get the same 10.4 ohms from the coil positive side to the IGN relay wire, but not from TFI pin 4 to the coil +
Here's the real kicker:
When I removed every battery side connection from the IGN relay, stopped getting the 10.4 ohms from said wire (infinite resistance), but I get the 10.4 from this eyelet connector (2 black wire)![Click image for larger version
Name: IMG_20190814_133134.jpg
Views: 1
Size: 94.8 KB
ID: 1285726](filedata/fetch?id=1285726&d=1565782228)
Ground issue somewhere?
In short; I get 10.4(k?) ohms (200k setting) from TFI pin 4 to IGN relay wire (in pic above),
I also get the same 10.4 ohms from the coil positive side to the IGN relay wire, but not from TFI pin 4 to the coil +
Here's the real kicker:
When I removed every battery side connection from the IGN relay, stopped getting the 10.4 ohms from said wire (infinite resistance), but I get the 10.4 from this eyelet connector (2 black wire)
Ground issue somewhere?
Comment