FS - '86 Country Squire LX - For parts or project

[88MercWagon]

Would you be willing to cut parts of the quarter panels out, namely the lower parts behind the rear wheel, the spare tire well, and the fender flairs? I can e-mail you pictures of what I need to patch my car up. Please LMK via PM.

[BGoins12]

Ok, I couldn't get some of the stuff off the wagon, or I didn't have the time, the scrapper is going to be here in 10 minutes....

But here is what I got off the car (Official list)

Rear flip Seats (Sold) ****
Nearly perfect black dash pad ****
Chevy Blazer center console, fits perfectly between the custom buckets.
Some trim pieces (Whatever I have with me at the meet)
Tripminder with harness (Works, but buttons need cleaned)
Stock Premium sound radio
Headlight buckets
Relay holders
Fender & frame braces (Hemihotrod402 claimed these)
Steering knuckle cover (the plastic one under the hood)
Starter solenoid (Newer Motorcraft one)
Newer ignition coil
EGR solenoid
MAP sensor
Oil dipstick (no tube, just the stick)
Cruise contol unit
Various relays and fuses
Complete distributor
Various hardware
Harmonic balancer
Stock injectors
HO injectors
Stock EEC
HO EEC (DA1)
Alternator bracket
8 Lifter dogbones with the spider
HO upper
Lower intake
Fuel rail
Timing cover
Lopo spacer with good EGR
Explorer TB (with lopo bellcrank)
HO TB
Idle air motor off Mustang 5.0, stock one as well installed on Explorer TB
Brand new Wix PCV filter
5.0 and 5.0 HO decorative plates
__________________

Make offers! I'm fair!

[BGoins12]

DOH! I hate that I can't edit my last post. Anyways, the following things are claimed -

1990LTD - MAP, Idle air valve, timing cover
Mike J. - Far rear seats
Mustang Bob - Dash pad

I think that's everyone!

[Grand Marquis GT]

How about the throttle cable, TV cable, and all associated brackets?

[MrMarquis]

If Hemi passes on the braces, I'd like 'em.

[BGoins12]

Ok, 3 things.....

FYI the HO injectors and HO EGR spacer are free, just pay shipping.

Grand Marquis GT, the tv cable and bracket were hacked up to jerry rig them, therefore I left them.

Mustang Bob, the dash pad isn't gonna happen either. I thought I had it in a safe place in my closet but the dog got in there, knocked it over and dusted it....... He cracked it all to hell.

[Grand Marquis GT]

Fffffffuuuuuuuuu-!

[BGoins12]

1990LTD had to back out of the MAP, Idle air valve, and timing cover. Shipping was far too much to Nova Scotia. So they are available now.

[LTDMan83]

How about the throttle cable, TV cable, and all associated brackets?

Tom, I have them all in my parts bin. PM me if you are interested. The TV cable is in excellent shape, and was pulled from a perfectly shifting car.

[BGoins12]

Anyone? I'll let this stuff go SUPER cheap. I just need it gone to get this Caddy on the road to get a job.

[BGoins12]

Ok, so someone messaged me to say it's not a bad idea to put some kind of price on this stuff, therefore I will! I am flexible on the prices I am listing, so don't be afraid to PM me with an offer. I can take Paypal or Money orders. If you need pictures, I will be glad to take them. I will ship any way you want.... UPS, USPS parcel, Priority mail, etc, just let me know and I'll box it up and get a price on shipping for you. Like I said, I just need this stuff gone as soon as possible.

Rear flip Seats (Sold) ****

Chevy Blazer center console, fits perfectly between the custom buckets. - $10 (Picked up, too large and heavy to ship)

Some trim pieces (Whatever I have with me at the meet)

Tripminder with harness (Works, but buttons need cleaned) - $40

Stock Premium sound radio - $20, volume knob is a little scratchy.

Headlight buckets, chrome in decent shape - $20

Relay holders (still have relays and the bracket they mount to) - $10

Fender & frame braces (Hemihotrod402 claimed these)

Steering knuckle cover (the plastic one under the hood) - $3

Starter solenoid (Newer Motorcraft one) - $10

Newer ignition coil - $10

EGR solenoid - $5

MAP sensor - $10

Oil dipstick (no tube, just the stick) - Free, just pay shipping

Cruise contol unit - $15

Various relays and fuses - Free, just pay shipping

Complete distributor - $30

Various hardware - Free, just pay shipping

Harmonic balancer - $5

Stock injectors - $5

HO injectors - Free, just pay shipping

HO spacer - Free, just pay shipping

Stock EEC - $5

HO EEC (DA1) - $50

Alternator bracket - $5

8 Lifter dogbones with the spider - $5

HO upper - $30

Lower intake - $10

Fuel rail - $15, has FPR

Timing cover - $10

Lopo spacer with good EGR - $15

Explorer TB (with lopo bellcrank installed and tack welded, includes later TPS) - $40

HO TB - $20

Idle air motor off Mustang 5.0, stock one as well installed on Explorer TB - $10

Brand new Wix PCV filter - Free, just pay shipping

5.0 and 5.0 HO decorative plates - $3 each

[BGoins12]

Bump! Make offers... I need this stuff out of my room!

[BGoins12]

Well, since the meet in Ohio has been canceled, I need to get rid of this stuff ASAP! Any reasonable offer will be accepted on this stuff.....

Rear flip Seats (Sold) ****

Chevy Blazer center console, fits perfectly between the custom buckets. - $10 (Picked up, too large and heavy to ship)

Tripminder with harness (Works, but buttons need cleaned) - $40

Stock Premium sound radio - Was $20...Now $10, volume knob is a little scratchy and the buttons are missing off the cassette controls.

Headlight buckets, chrome in decent shape - $15

Relay holders (still have relays and the bracket they mount to) - $5

Fender & frame braces (SOLD to hemihotrod402)

Steering knuckle cover (the plastic one under the hood) - FREE, just pay shipping

Starter solenoid (Newer Motorcraft one) - $5

Newer ignition coil - $5

EGR solenoid - $3

MAP sensor - $5

Oil dipstick (no tube, just the stick) - Free, just pay shipping

Cruise control unit - $10

Various relays and fuses - Free, just pay shipping

Complete distributor - $15

Various hardware - Free, just pay shipping

Harmonic balancer - $3

Stock injectors - $3 for all 8

HO injectors - Free, just pay shipping

HO spacer - Free, just pay shipping

Stock EEC - Free, just pay shipping

HO EEC (DA1) - $40

Alternator bracket - $3

8 Lifter dogbones with the spider - $3

HO upper - $25

Lower intake - $5

Fuel rail - $10, has FPR

Timing cover - $5

Lopo spacer with good EGR - $8

Explorer TB (with lopo bellcrank installed and tack welded, includes later TPS) - $30

HO TB - $8

Idle air motor off Mustang 5.0, stock one as well installed on Explorer TB - $5

Brand new Wix PCV filter - Free, just pay shipping

5.0 and 5.0 HO decorative plates - $1 Each!!!

[BGoins12]

HO upper, HO injectors, and Exploder TB are pending.

Slymer, you want the HO spacer as well? It's free!

[sly]

sure... this is the non-tubular type right?