Alright, picked up a set of heated mirrors off a 96 GMQ, but I can't get the mirrors to move, the harness on the heated mirrors has 5 wires vs the 3 that are on my non heated units. Are the motors fried or do I have to rewire the harnesses to get them to work? if they are fried, how hard would it be to replace the motors?
Announcement
Collapse
No announcement yet.
heated Mirrors problem.
Collapse
X
-
heated Mirrors problem.
2011 Ford Ranger Sport 4.0 2wd - Magnaflow Axleback exhaust, K&N 63 Series CAI, DiabloSport 87 Octane tune, LEDs, 3000K LED projector fogs, 5000K Mini H1 projectors - Daily
1967 Ford Galaxie 500 Sedan "C-Code" - 289 2bbl/Cruise-O-Matic - Money pit/projectTags: None
-
just need to figure out which wire does what. 2 are heater, 3 are motor. Should be a common wire to both motors if I remember proper-like.86 Lincoln Town Car (Galactica).
5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley
91 Lincoln Mark VII LSC grandpa spec white and cranberry
1984 Lincoln Continental TurboDiesel - rolls coal
Originally posted by phayzer5
I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers
Comment
-
Originally posted by GM_Guy View PostRewire. You'll need to get your hands on wiring diagrams for your car, and for the year of your donor.
Alex.
2011 Ford Ranger Sport 4.0 2wd - Magnaflow Axleback exhaust, K&N 63 Series CAI, DiabloSport 87 Octane tune, LEDs, 3000K LED projector fogs, 5000K Mini H1 projectors - Daily
1967 Ford Galaxie 500 Sedan "C-Code" - 289 2bbl/Cruise-O-Matic - Money pit/project
Comment
Comment