Announcement

Collapse
No announcement yet.

What can I pull off this?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    What can I pull off this?



    What can I pull off of this that will fit my '88? Like his do I convert that VIN into what axle it has. It has a rear stabilizer bar. Is this old enough to have the same mounting points as mine or was the axle updated with the body? I'm gonna be pulling the intake for a spare and the overflow tank/washer fluid reservoir. Also the exhaust manifold (has the "Lincoln logs) but what else? Car is getting scrapped by a friend, and he said I can have what I can pull.
    '88 Lincoln Town Car '78 F250 Hi-Boy
    '80 XS850 '80 GS450 '82 XJ650 '81 XJ650 '81XS850 '82 XV750

    Tags: None
    #2
    So it's a 90 Town Car? Grab the exhaust manifolds, fan shroud, steel bumpers are 1 year only, may be worth grabbing to sell. Sway bar mounts differently so it's a no go unless you cut the brackets off and weld them to your frame. Axle will work, Y code is 3.08 open, nothing special there. (I think 92 is when they changed the axle codes)
    Last edited by pantera77; 07-21-2013, 09:57 PM.
    2020 F250 - 7.3 4x4 CCSB STX 3.55's - BAKFlip MX4
    2005 Grand Marquis GS - Marauder sway bars, Marauder exhaust, KYB's
    2003 Marauder - Trilogy # 8, JLT, kooks, 2.5" exhaust, 4.10's/31 spline, widened rear's, metco's, addco's, ridetech's 415hp/381tq
    1987 Colony Park - 03+ frame swap, blown Gen II Coyote, 6R80, ridetechs, stainless works, absolute money pit. WIP

    Comment

      #3
      Yes, '90 town car. Sorry, should have specified that. The bumper covers are pretty bent up, so I'm assuming the bumpers are as well. But I'll take a look tomorrow again when its light out. And darn, was really hoping it had a trac-lok.

      Now from what I understand, the 5.0 block in the '90 was made to mate to the newer AODE, correct? So its the same bolt pattern as a 4.6?
      '88 Lincoln Town Car '78 F250 Hi-Boy
      '80 XS850 '80 GS450 '82 XJ650 '81 XJ650 '81XS850 '82 XV750

      Comment

        #4
        no. same old aod pattern. the 302 never had the mod motor bolt pattern.

        +1 fan shroud and tank
        +1 exhaust manifolds (Lincoln Logs)

        Only two things are infinite, the universe and human stupidity, and I'm not sure about the former. -- Albert Einstein
        rides: 93 Crown Vic LX (The Red Velvet Cake), 2000 Crown Vic base model (Sandy), 2003 Expedition (the vacation beast)
        Originally posted by gadget73
        ... and it should all work like magic and unicorns and stuff.
        Originally posted by dmccaig
        Overhead, some poor bastards are flying in airplanes.

        Comment

          #5
          Originally posted by TheMightyQuinn View Post
          Yes, '90 town car. Sorry, should have specified that. The bumper covers are pretty bent up, so I'm assuming the bumpers are as well. But I'll take a look tomorrow again when its light out. And darn, was really hoping it had a trac-lok.

          Now from what I understand, the 5.0 block in the '90 was made to mate to the newer AODE, correct? So its the same bolt pattern as a 4.6?
          Nope, that just has a typical AOD. If you want you could grab that too.
          2020 F250 - 7.3 4x4 CCSB STX 3.55's - BAKFlip MX4
          2005 Grand Marquis GS - Marauder sway bars, Marauder exhaust, KYB's
          2003 Marauder - Trilogy # 8, JLT, kooks, 2.5" exhaust, 4.10's/31 spline, widened rear's, metco's, addco's, ridetech's 415hp/381tq
          1987 Colony Park - 03+ frame swap, blown Gen II Coyote, 6R80, ridetechs, stainless works, absolute money pit. WIP

          Comment

          Previous template Next
          Working...
          X