PotM GrandMarq.NET - Panther Headquarters Forum Index PotM
GMN Chat Room GMN's STORE!! GMN's Gallery Please!!
Results 1 to 2 of 2

Thread: Vent window handle loose

  1. #1
    Hobbit
    Join Date
    Dec 2006
    Location
    Ontario, Canada
    Posts
    1,390

    Default Vent window handle loose

    How does the vent window handle come off? Mine is lose and I would like to tighten it.

  2. #2
    Stow It! GM_Guy's Avatar
    Join Date
    Sep 2008
    Location
    Ontario, Canada
    Posts
    3,705

    Default

    Based on the general motors truck, there is a roll pin that retains the handle. Gotta drive that out some, then the handle will pull free in some position; make note of the position the handle comes off as you can install them out of "sync", also mark the outside stud position when the the handle is in the correct locked position, otherwise same thing, it won't lock in the correct spot.

    When you pull the handle there is a spring and ball bearing (in the generals anyway) in the stud, get ready for them to fall/fly out. And there will be a wave and flat washer. Just note the order they are in. If you look down the center of the stud you'll see a screw head, tighten that up snug so the stud is oriented properly, don't over do it cause you'll crack the glass.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
GMN Approved Links!


www.rockauto.com www.adtr.net