Got new 2002 upper ball joint and cam adjust slots are different from the 1994 ball joint can I still use the 02 ones
Attached Files
 |
-
-
Yes. It just changes which adjuster changes camber/caster. Use the appropriate ball joint for the knuckle. The control arm will work fine.
Only two things are infinite, the universe and human stupidity, and I'm not sure about the former. -- Albert Einstein
rides: 93 Crown Vic LX (The Red Velvet Cake), 2000 Crown Vic base model (Sandy), 2003 Expedition (the vacation beast)
Originally posted by gadget73
... and it should all work like magic and unicorns and stuff.
Originally posted by dmccaig
Overhead, some poor bastards are flying in airplanes. -
Yes. The older ones are LH and RH, the later ones are the same both sides. Both will fit either spindle, just make sure you get it aligned. I'm using 94 arms and ball joints on mine with a 2000 spindle.86 Lincoln Town Car (Galactica).
5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley
91 Lincoln Mark VII LSC grandpa spec white and cranberry
1984 Lincoln Continental TurboDiesel - rolls coal
Originally posted by phayzer5
I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers
Everything looks like voodoo if you don't understand how it worksComment
Comment