No announcement yet.

hrm, anyone?

  • Filter
  • Time
  • Show
Clear All
new posts

    hrm, anyone?
    $55......i do need new tires, whats the spacer deal with these?
    jay--1983 towncar, 302v8 cfi, dual straight pipes w/resonators ,edelbrock motor goodies, custom interior, full custom stereo system, full rebuilt trunk audio setup, custom paint...more to come......

    '89 Ford LTD Crown Vic - '92 Ford F-150 Custom -
    '95 Ford Bronco XL -

    sigpic :rebel:


      Think 1" or so, those came on the V6 Mustangs.


        if they are 5 lug they will need 1" spacers for the fronts at least, most of us run 4 spacers so it doesent look dumb
        tires are prob 245/45/17's........little short but they will work

        1986 lincoln towncar signature series. 5.0 HO with thumper performance ported e7 heads, 1.7 roller rockers, warm air intake, 65mm throttle body, 1/2" intake spacer, ported intakes, 3.73 rear with trac lock, 98-02 front brake conversion, 92-97 rear disc conversion, 1" rear swaybar, 1 3/16" front swaybar, 16" wheels and tires, loud ass stereo system, badass cb, best time to date 15.94 at 87 mph. lots of mods in the works 221.8 rwhp 278 rwt
        2006 Lincoln Town Car Signature. Stock for now
        1989 Ford F-250 4x4 much much more to come, sefi converted so far.
        1986 Toyota pickup with LSC wheels and 225/60/16 tires.
        2008 Hyundai Elantra future Revcon toad
        1987 TriBurner and 1986 Alaska stokers keeping me warm. (and some pesky oil heat)

        please be patient, rebuilding an empire!


          Actually, tires on those are usually 205/65-15. However, I have seen 215/60-15 and 225/60-15 on those wheels, too.
          '03 300b MM (My pride and joy until 8/9/13 @129k)


            Any mustang wheels require at least 1" spacers
            Builder/Owner of Badass Panther Wagons

            Busy maintaining a fleet of Fords