Would a mustang under drive pulley for a 5.0 work? Im just asking because there are a few I know of cheap around here, granted they are used.
Announcement
Collapse
No announcement yet.
underdrive pulleys and ptv clearance gt40p's and lopo pistons
Collapse
X
-
"In science it is either physics or stamp collecting." - Ernest Rutherford
- Oct 2009
- 2878
- Keene NH
- Send PM
"Shakedown"- 1991 Grand Marquis GS Dual exhaust, Magnaflow xl turbos, Rear anti sway bar, Outlaw 1 wheels, 43k miles
1985 GMC 1500
-
no
muustangs and mk7's only have one belt.......if you didnt have ac, it might work, but you would have to space out the pulley to line up with the accys i believe
1986 lincoln towncar signature series. 5.0 HO with thumper performance ported e7 heads, 1.7 roller rockers, warm air intake, 65mm throttle body, 1/2" intake spacer, ported intakes, 3.73 rear with trac lock, 98-02 front brake conversion, 92-97 rear disc conversion, 1" rear swaybar, 1 3/16" front swaybar, 16" wheels and tires, loud ass stereo system, badass cb, best time to date 15.94 at 87 mph. lots of mods in the works 221.8 rwhp 278 rwt
2006 Lincoln Town Car Signature. Stock for now
1989 Ford F-250 4x4 much much more to come, sefi converted so far.
1986 Toyota pickup with LSC wheels and 225/60/16 tires.
2008 Hyundai Elantra future Revcon toad
1987 TriBurner and 1986 Alaska stokers keeping me warm. (and some pesky oil heat)
please be patient, rebuilding an empire!
Comment
-
"In science it is either physics or stamp collecting." - Ernest Rutherford
- Oct 2009
- 2878
- Keene NH
- Send PM
Gotchya."Shakedown"- 1991 Grand Marquis GS Dual exhaust, Magnaflow xl turbos, Rear anti sway bar, Outlaw 1 wheels, 43k miles
1985 GMC 1500
Comment
-
Like I said in the other thread.... as long as you stick with a stock camshaft, you should have NO piston to valve interference issues.
you should have even less problems with a P head, because the exhaust valve is tiny bit smaller.2003 Town Car Signature - 3.27 RAR, Dual exhaust and J-mod - SOLD 9/2011
89 Crown Victoria LX HPP -- SOLD 9/2010
88 Grand Marquis LS - The Original -- Totaled 5/2006
I rebuild AOD/AODE/4R70W/4R75E transmissions....Check out my Facebook page: https://www.facebook.com/pages/North...48414635312478
Comment
-
BTW... ASP racing claims you get full charge at 850 RPM with under drive pulley. so if you sit in traffic idling a lot, you may want to keep your foot on the gas a tad.
upgrading the stock alternator to a 3G is always a good idea. less fires that way.2003 Town Car Signature - 3.27 RAR, Dual exhaust and J-mod - SOLD 9/2011
89 Crown Victoria LX HPP -- SOLD 9/2010
88 Grand Marquis LS - The Original -- Totaled 5/2006
I rebuild AOD/AODE/4R70W/4R75E transmissions....Check out my Facebook page: https://www.facebook.com/pages/North...48414635312478
Comment
-
Originally posted by Lincolnmania View Postno
muustangs and mk7's only have one belt.......if you didnt have ac, it might work, but you would have to space out the pulley to line up with the accys i believeFormer panther owner
1981 CV 351 4bbl
1991 CV 302 EFI
Comment
-
moving the ac compressor and getting custom hoses made is going to cost more than the panther underdrive pulley.............i've done it already.....but instead used explorer accys....not worth the trouble if you ask me
1986 lincoln towncar signature series. 5.0 HO with thumper performance ported e7 heads, 1.7 roller rockers, warm air intake, 65mm throttle body, 1/2" intake spacer, ported intakes, 3.73 rear with trac lock, 98-02 front brake conversion, 92-97 rear disc conversion, 1" rear swaybar, 1 3/16" front swaybar, 16" wheels and tires, loud ass stereo system, badass cb, best time to date 15.94 at 87 mph. lots of mods in the works 221.8 rwhp 278 rwt
2006 Lincoln Town Car Signature. Stock for now
1989 Ford F-250 4x4 much much more to come, sefi converted so far.
1986 Toyota pickup with LSC wheels and 225/60/16 tires.
2008 Hyundai Elantra future Revcon toad
1987 TriBurner and 1986 Alaska stokers keeping me warm. (and some pesky oil heat)
please be patient, rebuilding an empire!
Comment
Comment