I going to put on my towncar O2 sensors, do the wires need to be lengthened to reach the mustang H-pipe bungs?
 |
-
1989 Lincoln Town Car - "Anabelle" - Original block, .030 over with SpeedPro pistons, rods fitted with ARP hardware, FRPP +volume oil pump, GT-40 3bar heads, Crane 1.72 rockers, 89' Fox cam, 93' Cobra lower intake, Explorer upper and 65mm TB, 93' Lightning EGR spacer, K&N intake kit from a 4.0L Ranger, 19lb/hr injectors w/ 87 Mark VII ECM, cat/smog deletes, Big Brake conversion, 3.55 K-Code Trac-Lok/Disc brake rear axle, CVPI LCA's w/1" sway bar in rear, wagon front sway bar, BBK 2.5" off-road H-Pipe, Flowmaster super 40s, HPP wheels, 3G alternator w/LMR.com wiring kit, gear reduction starter conversion, Best 1/4 time: 16.0 @ 85mph. -
This really seems to depend on the car... some people have to lengthen them and some don't. you can buy Bosch 02 sensors at the parts store with a longer harness on them. Bosch part # 13953
http://www.partsamerica.com/ProductD...pe=291&ptset=A2003 Town Car Signature - 3.27 RAR, Dual exhaust and J-mod - SOLD 9/2011
89 Crown Victoria LX HPP -- SOLD 9/2010
88 Grand Marquis LS - The Original -- Totaled 5/2006
I rebuild AOD/AODE/4R70W/4R75E transmissions....Check out my Facebook page: https://www.facebook.com/pages/North...48414635312478 -
Needed longer ones on the wagon. Didn't need them on the vic...
I just got the mustang application 02 sensors. they have a long harness on them. They are the ones that 88 Grandmarq posted above.Builder/Owner of Badass Panther Wagons
Busy maintaining a fleet of FordsComment
-
side note they wont work on 86's
1986 lincoln towncar signature series. 5.0 HO with thumper performance ported e7 heads, 1.7 roller rockers, warm air intake, 65mm throttle body, 1/2" intake spacer, ported intakes, 3.73 rear with trac lock, 98-02 front brake conversion, 92-97 rear disc conversion, 1" rear swaybar, 1 3/16" front swaybar, 16" wheels and tires, loud ass stereo system, badass cb, best time to date 15.94 at 87 mph. lots of mods in the works 221.8 rwhp 278 rwt
2006 Lincoln Town Car Signature. Stock for now
1989 Ford F-250 4x4 much much more to come, sefi converted so far.
1986 Toyota pickup with LSC wheels and 225/60/16 tires.
2008 Hyundai Elantra future Revcon toad
1987 TriBurner and 1986 Alaska stokers keeping me warm. (and some pesky oil heat)
please be patient, rebuilding an empire!
Comment
-
Ummmm, what is wrong with just lengthening the wires????
Comment
-
I had to lengthen one of my O2 sensor's harnesses. I also had to replace the O2 sensor wiring harness because the 86 plugs are not the same as the 88 sensors I bought and I don't have the harness quite in the right spot. My passenger side O2 sensor's harness is about 3 feet long, the driver's side one is stock length. I also have Mark VII O2 sensors so the wiring is a little longer than stock TC ones. Easy enough to extend them, but if you're buying new I'd probably suggest the Mustang or Mark VII ones, as they are longer and will save you the bother of screwing with it.86 Lincoln Town Car (Galactica).
5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley
91 Lincoln Mark VII LSC grandpa spec white and cranberry
1984 Lincoln Continental TurboDiesel - rolls coal
Originally posted by phayzer5
I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers
Everything looks like voodoo if you don't understand how it worksComment
Comment