I am going to attempt pulling the trans and engine as one unit. I am trying to figure out the trans linkage.
Pulled this apart without problems.
![](http://i199.photobucket.com/albums/aa283/XLTbeater/August%20Too%20012_zpsiq0pqeuv.jpg)
This rod is connected to the bracket pictured above....
![](http://i199.photobucket.com/albums/aa283/XLTbeater/August%20Too%20013_zps8gznxhbo.jpg)
which is connected to the TV cable bracket
![](http://i199.photobucket.com/albums/aa283/XLTbeater/August%20Too%20015_zpsknpv7oxz.jpg)
I am stuck at this point. Don't know if I should remove the rod (looks like it won't disconnect without difficulty) or remove the bracket that's still attached to the stud? That stud has a little play in it; moves back and forth about 1/8"; don't know if that's normal. If I have to remove the bracket, how do I remove it? It's stuck to the stud.
Packman
Pulled this apart without problems.
![](http://i199.photobucket.com/albums/aa283/XLTbeater/August%20Too%20012_zpsiq0pqeuv.jpg)
This rod is connected to the bracket pictured above....
![](http://i199.photobucket.com/albums/aa283/XLTbeater/August%20Too%20013_zps8gznxhbo.jpg)
which is connected to the TV cable bracket
![](http://i199.photobucket.com/albums/aa283/XLTbeater/August%20Too%20015_zpsknpv7oxz.jpg)
I am stuck at this point. Don't know if I should remove the rod (looks like it won't disconnect without difficulty) or remove the bracket that's still attached to the stud? That stud has a little play in it; moves back and forth about 1/8"; don't know if that's normal. If I have to remove the bracket, how do I remove it? It's stuck to the stud.
Packman
Comment