does anyone have a ECM pinout diagram for a 1990 GM? getting a standalone made to be plug and play but they're asking for a pinout.
 |
-
-
I do not, but I wonder if this page might have what you need:
http://www.grandmarq.net/oldfuelinje...0Lpinouts.html -
Here's one from the 90 EVTM
Sent from my iPhone using Tapatalk1990 Country Squire - under restoration
1988 Crown Vic LTD Wagon - daily beater
GMN Box Panther History
Box Panther Horsepower and Torque Ratings
Box Panther Production NumbersComment
-
Thank you guys very much. Really do appreciate it
Sent from my iPhone using TapatalkComment
-
Are ‘89 and ‘90 pinned out the same? I bought an ‘89 EVTM and there is NO ECM pin out.'85 CV coupe- 351W, T5-Z, FAST Ez-Efi, shorty headers, 2.5" duals with knock off flowmasters, 2.5" Impala tails, seriously worked GT-40 irons, Comp 265DEH cam, 1.7rr's, Mallory HyFire 6A, Taylor ThunderVolt 50 10.4mm wires, 75mm t/b, 3G alt swap, 140mph PI speedo, PI rear sway bar, '00 PI booster/MC, 95-97 front spindles, '99 front hub bearings/brakes, '92-'94 front upper control arms/ball-joints, 3.73's with rebuilt traction-lok, '09 PI rear disc swap, '96 Mustang GT wheels with 235/55R17's.Comment
-
They use the same computer, so it should be pretty similar, if not identical.1990 Country Squire - under restoration
1988 Crown Vic LTD Wagon - daily beater
GMN Box Panther History
Box Panther Horsepower and Torque Ratings
Box Panther Production NumbersComment
-
ECM pinouts: http://www.grandmarq.net/oldfuelinje...0Lpinouts.html
Yes, they should be the same unless the 90 uses California MAF setup.
Only two things are infinite, the universe and human stupidity, and I'm not sure about the former. -- Albert Einstein
rides: 93 Crown Vic LX (The Red Velvet Cake), 2000 Crown Vic base model (Sandy), 2003 Expedition (the vacation beast)
Originally posted by gadget73
... and it should all work like magic and unicorns and stuff.
Originally posted by dmccaig
Overhead, some poor bastards are flying in airplanes.Comment
-
Thanks fellas!'85 CV coupe- 351W, T5-Z, FAST Ez-Efi, shorty headers, 2.5" duals with knock off flowmasters, 2.5" Impala tails, seriously worked GT-40 irons, Comp 265DEH cam, 1.7rr's, Mallory HyFire 6A, Taylor ThunderVolt 50 10.4mm wires, 75mm t/b, 3G alt swap, 140mph PI speedo, PI rear sway bar, '00 PI booster/MC, 95-97 front spindles, '99 front hub bearings/brakes, '92-'94 front upper control arms/ball-joints, 3.73's with rebuilt traction-lok, '09 PI rear disc swap, '96 Mustang GT wheels with 235/55R17's.Comment
Comment