Sly's Panthers

[tjc78]

Nice!!

[87gtVIC]

Wait the old plaque they just taped over!? lol


Make sure to apply a dab of silicone to that intake casting plug to ensure it stays put.

[sly]

New intake jewelry installed on the Mark... thanks to 87gtVIC.

PICS!




And the old plaque... the previous owner who did the swap ghetto rigged this to work on a panther.


and no tape...

[sly]

exhaust vid updated for the vic

[Piece-it pete]

That looks great!

Pete

[sly]

Got the charge cable boot in today... Ordered a couple of those from Del City for $0.86 each... yes... less than a buck.

Pic:


I actually ordered 2 and a megafuse holder (will change that out at a LATER date... like possibly never... dunno) and the other boot is going on the Lincoln as it's still missing that.

[sly]

like I said... I don't mind... neither does the wife.

[86VickyLX]

I wouldn't fuck with that. It's got 5 clutch packs per side. It's probably gonna make some noise compared to stock 3 clutch packs or even the modified 4 clutch packs.

[sly]

meh. I don't mind it.

[jaywish]

Well if you have it up in the air for some reason, add up to 1/2 a tube of modifier.

[sly]

not yet... they are getting quieter though.


and the LED scanner is in!

[jaywish]

Say, did the limited slip clutches stop making noise ?

[sly]

The first pic, you can see the missing teeth... there's one tooth visible in the last pic.

The second pic is the gear I made the first time (goes on the back of the first pic) out of an RC gear that was twice as thick and used some rod to fill the center hole enough to work. Glued together with plastic welder epoxy. It still looks ok. The electrics and all work if anyone wants the core of the speedo. The planetary is shot but the little gear is ok and will be included. If there's no offers by the end of the week, it goes in the trash.

[MrMarquis]

That's one way to roll back the odometer. Just put a new one in!

[gabegt90]

Nice its a brand new car only 2 miles on it lol