Originally posted by miamibob
View Post
![]() |
Announcement
Collapse
No announcement yet.
Sly's Panthers
Collapse
X
-
-
stupid obvious question but you did try moving the seat forward to get better access right?
Leave a comment:
-
Clean car is clean...
Look at how shiny them wheels are. That's the best they've looked since we've owned the car (6 years now)
Leave a comment:
-
The green arrow, in the second pic, shows how far back that nut is.
to get in there, you would need 2 u-joints, an 18mm, and a 2" extension to get around the brackets. 5/16 10mm however was enough to get the bolts off the bottom of the seat and remove it from the rails. The nut was pretty f'n tight too. Once the seat was out of the way... I could get in there with the 18mm (had to wedge it on the nut first as the rails blocked clearance a bit) with a 6 inch extension and get proper torque on that thing to get it loose.
Leave a comment:
-
I'll take a picture of it later then. You'll see what I mean then. The side by the doors was EASY. The side in the middle of the car has zero room to manuver.
Leave a comment:
-
How'd you have a problem getting those out? Do your doors not open all the way or something? I had my mom's seats out with the tracks attached...
Leave a comment:
-
interior clean done.
Pics:
FYI: Aero seats are a PITA to get out. Gotta take the seat off the rails first and THEN take the rails out... at least for the power seats.
Leave a comment:
-
vic was always the wife's daily and will be again after I get it all sorted out. Digital speedo and loosen up the shift cable a bit. Maybe sooner. I want my tunes back and the 88 has the thump in the trunk.
Leave a comment:
-
Nice Jason. So if I missed it...this is now your car....as opposed to your wifes?
Leave a comment:
Leave a comment: