Announcement

Collapse
No announcement yet.

{Transmission}Tremec 3550, episode 2...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    {Transmission}Tremec 3550, episode 2...

    Well folks, im at the point of no return.....









    I just put 500 down on it. thats another 300 left to go, and its mine, all mine!! :banana:
    1983 Grand Marquis 2Dr Sedan "Mercules"
    Tremec TKO conversion, hydraulic clutch, HURST equipped!


    #2
    :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana:
    2008 Mercury Grand Marquis GS Bone Stock

    The modern definition of "racist" is "someone who is arguing with a Liberal".--updated Peter Brimelow quote.

    Comment


      #3
      I run a Tremec in my stang.

      If you score a bellhousing from a 79-83 Mustang v8 4spd it should work with the tremec. The one you need is the one for the SROD trans. I bought a new one, but later found one at the wreckers.

      Everyone says the stock Tremec shifter is terrible, but I run it and can't really complain. It does not come with a handle though.

      The 3550 takes a t5 clutch and yoke.

      Is it going behind your 351W or a 302?

      Tom

      Comment


        #4

        1986 lincoln towncar signature series. 5.0 HO with thumper performance ported e7 heads, 1.7 roller rockers, warm air intake, 65mm throttle body, 1/2" intake spacer, ported intakes, 3.73 rear with trac lock, 98-02 front brake conversion, 92-97 rear disc conversion, 1" rear swaybar, 1 3/16" front swaybar, 16" wheels and tires, loud ass stereo system, badass cb, best time to date 15.94 at 87 mph. lots of mods in the works 221.8 rwhp 278 rwt
        2006 Lincoln Town Car Signature. Stock for now
        1989 Ford F-250 4x4 much much more to come, sefi converted so far.
        1986 Toyota pickup with LSC wheels and 225/60/16 tires.
        2008 Hyundai Elantra future Revcon toad
        1987 TriBurner and 1986 Alaska stokers keeping me warm. (and some pesky oil heat)

        please be patient, rebuilding an empire!

        Comment


          #5
          i missed somthing!
          Pete ::::>>> resident LED addict and CFI defector LED bulb replacements
          'LTD HPP' 85 Vic (my rusty baby) '06 Honda Reflex 250cc 'Baileys' 91 Vic (faded cream puff) ClifFord 'ODB' 88 P72 (SOLD) '77 LTDII (RIP)
          sigpic
          85HPP's most noteworthy mods: CFI to SEFI conversion w/HO upperstuff headers & flowmasters P71 airbox Towncar seats LED dash light-show center console w/5 gauge package LED 3rd brake light 3G alternator mini starter washer/coolant bottle upgrade Towncar power trunk pull underhood fuse/relay box 16" HPP wheels - police swaybars w/poly rubbers - budget Alpine driven 10 speaker stereo

          Comment


            #6
            Originally posted by TommyN
            I run a Tremec in my stang.

            If you score a bellhousing from a 79-83 Mustang v8 4spd it should work with the tremec. The one you need is the one for the SROD trans. I bought a new one, but later found one at the wreckers.

            Everyone says the stock Tremec shifter is terrible, but I run it and can't really complain. It does not come with a handle though.

            The 3550 takes a t5 clutch and yoke.

            Is it going behind your 351W or a 302?

            Tom
            Well tom, you have answered all of my questions

            I also hear the length of the trans is the same as a T5, meaning I wont need a new driveshaft!! :banana:

            Luckily, others have learned from their mistakes when doing it, so I will be good.
            1983 Grand Marquis 2Dr Sedan "Mercules"
            Tremec TKO conversion, hydraulic clutch, HURST equipped!

            Comment


              #7
              you should go to the junk yard, and pull a 5 speed out of a 4 cylinder Ranger... now thats a tranny that is TOUGH


              grand_marquis_gt: "Wow dude, you got the GMGT sedan!"


              there, now im cool too

              Comment


                #8
                [quote="grand_marquis_gt

                I also hear the length of the trans is the same as a T5, meaning I wont need a new driveshaft!! :banana:

                Luckily, others have learned from their mistakes when doing it, so I will be good. [/quote]

                I did not change the driveshaft in my Mustang from the t5 to the tko. Just swapped the yoke that came with the tko onto the old driveshaft. Hopefully your AOD yoke will work with the 3550.

                Are you going to run a mechanical clutch linkage like Black & Flames runs? That looked like a better setup than a cable like 4kfe ran. If you don't mind the link to the other board, here is the link to his setup:

                I receive many private messages about my clutch linkage. I decided to film, so it could give you a better idea of the "simplicity" of the job! :p Archive - This was my old cable-activated clutch DO NOT use cable-clutches unless you are able to drive clutchless. I had to dri…


                www.jdsperformance.com had a good price on a SPEC clutch. The stage I should be pretty good. Supposed to have less pedal effort than a stock stang clutch. I run the stage II, but it is stiffer and I probably could have got the stage I.

                Tom

                Comment

                Working...
                X